![]() ![]() If you have to go to this point I would make sure to have some extra thermal paste as you do not want to reseat it with the same thermal paste as contaminents and air bubbles can get in. Once you pull the CPU look for something like this:įor number 2 the only way to check is to unmounts the heatsink and carefully pull the CPU out of the socket. If you have to go to this point I would make sure to have some extra thermal paste as you do not want to reseat it with the same thermal paste as contaminents and air bubbles can get in. If the drivers for that GPU are not updated, then that may affect your gaming. If all the memory sticks present the same issue, the DRAM light stays on, then we move on to number 2.įor number 2 the only way to check is to unmounts the heatsink and carefully pull the CPU out of the socket. Check if there is any dirt on the CPU Socket Pin or CPU Pin as shown in the images below. If you get the same result with one of the memory sticks, as in the system does not complete POST and the DRAM light stays on, then you found a bad stick. CPU LED light is always ON after power on (indicates no CPU or CPU faulty): Please follow the troubleshooting steps below: 1. You could have bent pins on the socketįor number 1 the easiest way to test it is to pull the sticks out and test each stick individually in slot A1 (closest to the CPU). If it is staying lit at the DRAM then it could be one of two issues.Ģ. All the LEDs on the board will light once and normally go in this order:ĬPU > DRAM > PCIe> Storage (if it has this one). Ok that is different than your original post. ![]()
0 Comments
Leave a Reply. |